How to install bathroom cabinet?

by delavin home
Sources SVG
Sources
How To Install A Powered Bathroom Mirror Cabinet - YouTube
www.youtube.com favicon
www.youtube.com
·
1
How to Install a Bathroom Vanity From A to Z - YouTube
www.youtube.com favicon
www.youtube.com
·
2
Amazon.com: Iwell Bathroom Cabinet Wall Mounted, Bathroom Wall ...
www.amazon.com favicon
www.amazon.com
·
3
[PDF] Mirror Cabinet Installation Instruction - Hudson Reed
www.hudsonreed.co.uk favicon
www.hudsonreed.co.uk
·
4
Sources SVG
Answer
Here are the key steps to install a bathroom wall cabinet:
  1. Plan the cabinet's placement by considering the available space, plumbing, and electrical outlets. Mark the mounting points on the wall and locate any obstacles behind it
    1
    .
  2. Prepare the mounting surface by ensuring it is clean, level, and free of obstructions. Use a stud finder to locate wall studs for secure mounting
    1
    .
  3. Assemble the cabinet according to the manufacturer's instructions. Pay close attention to the hardware and follow the steps carefully. Some cabinets may require pre-drilling holes for easier installation3.
  4. Lift the assembled cabinet into the desired position on the wall. Use a level to ensure it is straight and adjust as needed. Mark the mounting holes on the wall through the cabinet's mounting brackets
    1
    .
  5. Drill pilot holes at the marked locations. If mounting into studs, use wood screws. For drywall, use wall anchors or molly bolts for added support
    1
    .
  6. Secure the cabinet to the wall by screwing the mounting brackets into the pilot holes. Ensure the cabinet is level and tightened securely
    1
    .
  7. Install any shelves, doors, or hardware according to the instructions. Adjust the doors to ensure they open and close properly
    2
    .
  8. Caulk around the edges of the cabinet to seal any gaps and create a finished look. Apply a bead of silicone caulk between the cabinet and wall
    2
    .
  9. Clean the cabinet and surrounding area. Enjoy your newly installed bathroom storage solution!
Remember to follow all safety precautions, use proper tools, and consult a professional if needed. With careful planning and attention to detail, you can successfully install a bathroom wall cabinet.

References

1. How To Install A Powered Bathroom Mirror Cabinet - YouTube2. How to Install a Bathroom Vanity From A to Z - YouTube3. Amazon.com: Iwell Bathroom Cabinet Wall Mounted, Bathroom Wall ...4. [PDF] Mirror Cabinet Installation Instruction - Hudson Reed5. Bathroom lighting | Geberit UK



Author: Bunnings Warehouse



Key insights

  • ️ The tools needed for installing a bathroom cabinet include a hammer drill, normal drill, spirit level, stud finder, masking tape, tape measure, pencil, safety gear, and screws.
  • Finding the centerline in front of the vanity is the first step to setting up the cabinet.
  • Measuring and marking the centerline is crucial for installing a bathroom cabinet with precision.
  • Finding the studs with a stud finder is crucial for accurate installation of the bathroom cabinet.
  • Pre-drilling holes in the cabinet makes it easier to avoid a messy finish on the timber and ensures the screw won't grab at the cabinet.
  • ️ The process of installing the doors on the cabinet may be trickier than it sounds, but it's important to ensure they are easy to open.

Timestamped Summary

  • 00:00 Learn how to install a bathroom cabinet for practical storage and added space with mirrors, using tools like a drill, spirit level, stud finder, tape measure, pencil, safety gear, and screws.
  • 00:29 Center the bathroom cabinet in front of the vanity and align it with the grout line using a level to find the centerline.
  • 00:56 Measure and mark the centerline on the wall, then measure the cabinet width and make a mark for installation.
  • 01:40 Measure and mark the screw holes using a stud finder, then measure from the mark to the stud and mark the cabinet for drilling.
  • 02:05 Pre-drill holes in the cabinet first, then have a friend hold it in place while you drill through the tiles and screw the cabinet into the timber.
  • 03:08 Install bathroom cabinet by putting up shelves, attaching doors, and ensuring easy door opening.

Video Full Text

  • 00:00 I want to show you how to install a bathroom cabinet. Bathroom. Cabinets are really practical really good for storage and can also with mirrors on front add a lot of space to a bathroom. The tools we need are a hammer drill a normal drill a spirit level a stud finder. Some masking tape. A tape measure a pencil some safety gear and some screws but most importantly the bathroom cabinet itself. When positioning your cabinet.
    Read More
  • 00:29 It's important to look around the room and see what the aesthetics are so in this case we've got a vanity here and we'd like to Center it in front of that obviously in front and I'm also looking at the grout line across the top here. And I think that would look really good to have the top of the cabinet lining up with that so the first step to get this set up would be to find a centerline in front of the event E here which I'll just do with a level now. Most of entities have their taps right in the middle.
    Read More
  • 00:56 So I'm going to use that as a centerline and just make a few marks on the wall. So now that I've got a centerline. Here I can start to measure the cabinets for its width to find out where we mark it on the wall. I've taken the mirrors and the shelves out of the cabinet just so when I put it up to make a lot easier for me to handle so that's 600 millimeters wide which will mean I need to make a mark 300 millimeters from my centerline to the right. Now I've got my mark. I'm just going to level it down as well. Now that I've got my right hand side marked out and I know where I'm going to put it on the top.
    Read More
  • 01:40 I can measure out my first screw hole and find out where the stutters I've got a stud finder here. And I'm just going to try and find out where they are there with Carmen. You'll know your famine when the light shines red and it beeps in a long time. Now that I know where the stutters I can measure from the right hand mark we've got here to the stud and then I'll know where to mark on the cabinet for our drill hole 304.
    Read More
  • 02:05 It's easier to pre-drill the holes in the cabinet first mainly because the masonry but you need to go through. The tiles won't leave a nice finish on the timber. It also makes it easier when you're putting it up there that the screw won't grab at the cabinet now that I've got the improved I'm going to ask a friend to come hold it and place why I drove through the tiles that out there on that line. Now that we've got it in place. I'm just going to do a little drill with the masonry bit. So I know where to go and then we can take the cabinet down and drill them through properly. Now. I've got to really clear marks now going to be drilling into the tiles because that's really loud. I need to put my particular gear on now. I'm ready to screw the cabinet in in this case because we're going into timber I just need a screw to go straight into it.
    Read More
  • 03:08 But if I was in that situation where I couldn't go into some. But I may need to use a wall plugs. Now that that's up all we need to do is put the shelves back in and put the doors back on and then we've done. There's a bit of a neck to this you've got to put the front edge of the hinge in first and then click the back end. It's easier than it sounds just remember when you're installing the doors. You want to have a look at the bottom of the door so it's easy to open. Here. We go that's how you install a bathroom cabinet.
    Read More


Back to Delavin Shower