How to fix a leaky bathtub faucet?

To fix a leaky bathtub faucet, follow these steps:

Turn off the water supply to the faucet by locating the shut-off valve near the water heater or meter and turning it clockwise. Open the faucet to drain any remaining water
1
2.
Remove the faucet handle by prying off any decorative caps, unscrewing the handle screw, and gently pulling off the handle
1
2.
Identify the source of the leak by inspecting the internal components like washers, O-rings, and seals for wear or damage. Common culprits include worn-out washers or O-rings2.
Replace any faulty parts with new ones that match your faucet model. Apply a thin coat of silicone grease to the new parts before reinstalling
1
.
Reassemble the faucet by putting the handle back on and securing it with the screw. Replace any decorative caps
1
2.
Turn the water supply back on and check for leaks. If the leak persists, repeat the process or consult a professional plumber2.

For compression faucets, remove the valve stem to access the washer. For cartridge or disk faucets, remove the retaining nut or clip to access the cartridge or disk and replace it if heavily corroded3. Regular inspection, cleaning, and addressing minor issues promptly can help prevent faucet leaks2.

Key insights

Shutting off the water supply to the house is the first step in fixing a leaking bathtub faucet, and it can usually be found near the water heater or the meter.

Worn or damaged cartridges can allow leaks, causing a need for replacement.

Knowing how to fix a leaking bathtub faucet can save time and money, and put an end to the annoying drip, drip, drip.

Timestamped Summary

00:00 Identify and fix a leaking bathtub faucet by shutting off the water supply and letting any remaining water drain from the pipes.

00:44 Remove the faucet handle, cartridge, and other components to fix a leaking bathtub faucet. Apply silicone grease to the new cartridge and reassemble the faucet.

02:03 Turn on the water supply valve, let the water run to flush debris, and fix a leaking bathtub faucet to save time and money.

Video Full Text

00:00 A leaky faucet can be more than just annoying. The wasted water can add up to higher water bills. We're going to take you through the steps of identifying and fixing a leaking bathtub fossil without calling a plumber. Before starting any work, shut off the water supply to the house. The shut-off valve can usually be found near the water heater or the meter. Once the water is turned off, turn the faucet handle to the On position, and let any remaining water drain from the pipes. Old faucet handles can cause a dripping faucet.

00:44 To check, the faucet handle needs to be removed. Use an allen wrench to loosen the screw in the center of the faucet handle. With the screw removed, wiggle the handle and pull it off gently. In order to get to the cartridge, remove the handle adapter followed by the scald device. Then you'll see a metal barrel. Slide the barrel off to see the cartridge. Worn or damaged cartridges can allow leaks. Pry up the retaining clip. To remove the cartridge, attach the cartridge removal piece. Using a wrench, work the cartridge stumps out with firm twist and pulls. Apply a thin coat of silicone grease to the new cartridge and slide into the fossa body in the same position as it was originally. Reinstall the retaining clip, metal barrel, scald device, and handle adapter. Slide the handle on and secure it in place.

02:03 Turn the water supply valve back on. Let the water run for a few minutes to flush any debris from the components. Knowing how to fix a leaking bathtub. Fossa can save time and money, and you won't have to wait to put an end to the annoying drip, drip, drip. Here's a list of tools and materials. Good luck, and thanks for shopping at the Home Depot.

How to fix a leaky bathtub faucet?

References

Key insights

Timestamped Summary

Video Full Text