How to clear a slow bathroom sink drain?

Sources SVG
Answer
To clear a slow bathroom sink drain, try the following steps:
  1. Remove the stopper by gently lifting it up and rotating it counter-clockwise if needed. This will give you direct access to the drain opening4.
  2. Pour a large pot of boiling water slowly down the drain. The hot water can help break up and loosen the clog4.
  3. Pour one cup of baking soda into the drain, followed by one cup of white vinegar. Let the mixture sit for about 10 minutes, then run the water to see if it clears the clog. The chemical reaction can help dissolve the buildup34.
  4. If the drain is still slow, use a plunger. Fill the sink about 1/3 full with water, form a seal with the plunger, and plunge up and down vigorously. This can help dislodge the clog4.
  5. Remove the P-trap by unscrewing the slip nuts on either side. This U-shaped pipe can often collect hair, soap scum, and other debris that causes clogs. Inspect it and clean out any debris
    1
    2
    4.
  6. If the clog is not in the P-trap, it may be further down in the drainpipe. Use a drain snake or auger to try to clear the clog. Feed the snake into the drain and operate the drill to rotate it periodically
    2
    4.
  7. As a last resort, you may need to remove the entire sink drain assembly to access the clog. This involves unscrewing the drain flange and removing the pivot rod for the stopper. Consult a professional plumber if you are uncomfortable doing this4.
Remember to always use caution when working with plumbing and consider calling a professional if you are unable to clear the clog yourself. Regular maintenance, such as using drain covers and cleaning the drain monthly with baking soda and vinegar, can help prevent future clogs3.




Author: MrKistel



Key insights

  • The likely culprit for a slow-draining bathroom sink is a clog in the trap or congestion in the stopper apparatus.
  • Removing and cleaning the trap under the sink can help with a slow drain issue.
  • 🧼 Replacing the stopper and other parts of the sink can be a simple and inexpensive fix for a slow drain.
  • ️ The mechanism in the tube is prone to getting dirty and rusty, potentially causing clogs in the bathroom sink.
  • 🤢 The clog in the sink is pretty nasty and gnarly, but cleaning it out will fix the slow drain.
  • It's always satisfying to fix something yourself and save money in the process.

Timestamped Summary

  • 00:00 Fix a slow draining bathroom sink by checking for a clog in the trap or congestion in the stopper apparatus, and dismantle the sink to remedy the issue.
  • 00:56 Remove and clean the trap, dismantle the sink parts, and unthread the plug to fix a slow draining bathroom sink.
  • 01:46 Remove and clean the pipe and stopper to fix a slow draining bathroom sink.
  • 02:28 Clean and potentially replace the gasket and stopper to fix a slow-draining bathroom sink.
  • 03:05 Clean out the sink drain to fix slow drainage caused by debris and gunk buildup.
  • 03:45 Clean out the clog in the sink and put everything back together.

Video Full Text

  • 00:00 Today I'm going to show you how to fix a bathroom sink that's just not draining right stick around hey guys. Joe here and the likely culprit is probably one of two things. First you could have a clog in your trap. Very common happens a lot second what happens in our bathroom sink we have a stopper. Like this we have an apparatus below the sink that goes up and down right and so it happens is in. Here. There's a lot of congestion and that's an area where hair and all kinds of nasties can get hung up in there and that's usually a very likely cause. So to remedy. Any of these issues you simply have to dismantle the sink and get to these things and so in order to do that first thing I do is I put a bucket under the sink to catch any water.
    Read More
  • 00:56 Then I go ahead and I remove the trap just on the thread. It pretty easy stuff dump. The water out check the trap see if it's dirty and then I got a dismantle this thing here so in the under the sink. This sits like this first and to remove this part and there's a little Prussian spring. There I just pinched that pull it off remove this then what I do is take this bar and in this case I could conveniently push it behind my valve getting out of the way and then I could under this whole thing take this out as one. However I'm still connected to the plug so in order to get that out I have to unthread this section here and now drop.
    Read More
  • 01:46 This whole pipe take this out and then pull out the stopper pretty easy stuff and then I simply go and clean out all the nasties alright. So what I want to do is just clean out. All this stuff now. So in this case my traps a little dirty but it's definitely not the major problem. I'll go ahead and clean it out a little bit here mmm yummy just for giggles so traps clean. That's good here's the actual stop cocky thing you're going to go ahead and do others you might as well go ahead and replace. These things are pretty inexpensive.
    Read More
  • 02:28 There's a gasket here and that's gonna get gnarly over time and you might as well replace it. But I didn't have one so I'm going to reuse this one just clean it a bit okay two for two alright. So this is the thing that goes in the tube that basically makes this go up and down and normally the clogs happen right. Here you can see. This is a little dirty I don't wipe it off. This is getting the point where it's a little rusty. This could probably be replaced too but I'm gonna get some more miles out of this one alright so there's that and then in our case.
    Read More
  • 03:05 Here's a problem pretty nasty stuff. I don't know what's in there. But it's gnarly there's some gum there. But here's the bad spot right down here in the bottom. All that that hole should be as big as this hole. So we need to clean this out and then we will be good to go. I think what I'm gonna do is just shove a paper towel in there take this and shove it through that's nasty super super nasty yucky yucky yucky.
    Read More
  • 03:45 So that's why it was clogged. Okay put that back in there for now I don't even know what that was now you can see we can see through there again and then for giggles. I'm gonna run one more through. So all we need to do now is just go put everything back together and we should be good to go so thanks for watching guys. If you found this as helpful please give the video a thumbs up if you liked it why not subscribe thanks for watching. I'm Joe Pistone.
    Read More