How do i remove a bathroom sink drain?

by delavin home
Sources SVG
Sources
Plumbing Advice : How to Remove a Sink Drain Assembly - YouTube
www.youtube.com favicon
www.youtube.com
·
1
How to Remove a Bathroom Sink Pop Up Stopper - YouTube
www.youtube.com favicon
www.youtube.com
·
2
8 Items You Should Never Pour Down the Drain | Oatey
www.oatey.com favicon
www.oatey.com
·
3
How do I remove the sink drain in this situation?
diy.stackexchange.com favicon
diy.stackexchange.com
·
4
Sources SVG
Answer
To remove a bathroom sink drain, follow these steps:
  1. Remove the Lift Rod:
    • Start by removing the lift rod from underneath the sink. This will allow you to access the stopper and the drain assembly more easily
      1
      .
  2. Loosen the Locknut:
    • Use pliers to loosen the locknut located at the bottom of the drain assembly. This may take some time, especially if it is rusty
      1
      .
  3. Remove the Drain Assembly:
    • Once the locknut is loosened, work the drain assembly up so you can access the ring on top. Use pliers if necessary to unscrew the ring. After the ring is removed, the rest of the drain assembly should come out from the bottom side
      1
      .
  4. Reinstalling:
    • To reinstall the drain assembly, apply plumber's putty around the drain ring. Then, slide the assembly back into place and tighten the locknut from the bottom. Ensure the threads for the lift rod are facing towards the back for smooth reassembly
      1
      .
By following these steps, you should be able to remove and reinstall your bathroom sink drain effectively.

References

1. Plumbing Advice : How to Remove a Sink Drain Assembly - YouTube2. How to Remove a Bathroom Sink Pop Up Stopper - YouTube3. 8 Items You Should Never Pour Down the Drain | Oatey4. How do I remove the sink drain in this situation?5. How to Fix or Maintain Your Sink's Pop-Up Mechanism - YouTube



Author: Bill Of All Trades



Key insights

  • Replacing the drain assembly can be a simple DIY project for your bathroom sink.
  • It's important to have gloves, a bucket, and pliers on hand when doing any plumbing work to prevent leaks and make the process easier.
  • The whole sink drain can come right up with a little maneuvering and sliding down the gasket.
  • Some drain assemblies come with their own gasket, eliminating the need for plumber's putty.
  • Teflon tape is essential to prevent leaking in the sink drain assembly.
  • Make sure to tighten the plastic washer inside to avoid any leaks.
  • Checking for leaks after replacing the drain is crucial to ensure everything is properly installed and functioning.

Timestamped Summary

  • 00:00 Learn how to replace the drain assembly on your bathroom sink to avoid clogs and improve functionality.
  • 00:36 Remove the drain assembly with gloves and pliers, and loosen and remove the drain stopper if necessary.
  • 01:07 Loosen the bolt, wiggle and push up to remove the sink drain.
  • 01:58 Clean the sink and test fit the new drain assembly with its own gasket.
  • 03:16 Use plumber's tape on the new assembly threads to prevent leaking, and make sure to match the sink drain with or without an overflow.
  • 04:13 Install the sink drain by aligning the gaskets and tightening the nut, then check for clogs.
  • 06:35 Check for leaks after replacing the drain, and enjoy your shiny new sink!

Video Full Text

  • 00:00 Hey there folks in today's video. I'm going to show you how to replace the drain assembly on your bathroom sink. You can do this if you're replacing the whole faucet and it comes with a drain assembly or you can just do the drain assembly that's up to you. We're just doing the drain assembly because we don't like this one with the stopper. In it. It gets too much hair clogged in it so we're going to replace it. With this nice. One here with just a straight pipe through. So we're going to go ahead we'll meet you under the sink to show you what needs to be done all right. So we're here under the sink.
    Read More
  • 00:36 This is your drain assembly right here and we're going to need. Some gloves a bucket anytime you do any plumbing just in case anything leaks and a set of pliers here so all we're gonna have to do if you have a drain stopper like we do there'll be an assembly like this you'll have to take out if you don't have that then you can just skip this step. So we're just going to loosen this piece off and then remove it.
    Read More
  • 01:07 That piece can just hang there. Then we're going to open up our pliers. All the way loosen this bolt right here and then if you push up and give a little wiggle when you look up at your sink. You'll see it start to rise and you can grab it with your other hand and then you're going to have another gasket. Here just take that and slide it down and the whole thing will come right up. So we're just going to set that aside and we're going to take you quickly back to the top all right.
    Read More
  • 01:58 So at this point with your bucket still under just use your household cleaner that you like using and give this a nice little spray and we're going to clean it up real nice. Now if you have some really built up stuff. You can just use a knife or a scraper. Now we're just going to go back under the sink and I'll see you in just a sec all right. So we're going to do the same thing on the underside here. Just like that then you're going to get your new drain assembly. Here we're just going to test fit just remove any bolts on it. Now this one is one that you don't need plumber's putty for it has its own little gasket here and this is your bottom gasket.
    Read More
  • 03:16 Here. We're just gonna move that down. So we're just gonna go and grab some plumbers tape and we'll be right back all right so on your new assembly. Here you're gonna. See there's a bunch of threads here you're gonna want teflon tape on that just to make sure that there's no leaking and one more note to make if you have an overflow in your sink. You need one like this where it's got a gap on either side. If you don't have an overflow you need to get one that doesn't have this gap. So we have an overflow. So we need to make sure our overflow is on the front.
    Read More
  • 04:13 So we need to face this gap towards the overflow when we put it in so we're going to drop it in with just our first gasket and then we're going to slide our second gasket on over top followed by a plastic washer. It comes with and your brass. Nut you can loosen this off and that will make it easier to get on make sure that the plastic washer inside here is sitting inside tighten. Just this one down push your gasket. All the way up followed by your washer and your nut then you're just going to use your wrench to tighten that nut up and one last step you can do you don't have to do this but I like to since we have the bucket here. I just like to take off this bottom piece right here just to make sure that there's no clogs and nasty water tighten.
    Read More
  • 06:35 It back up and you're gonna run your sink just to make sure nothing's leaking all right there's nothing leaking. That's all there is to it folks. I'm just going to take you back up overhead and take a look at what we've done so. Now we have a nice shiny new drain. That's all there is to it folks hopefully. You found this helpful and as always please like and subscribe.
    Read More


Back to Delavin Shower